Resources by Julie Boyd
Displaying 1 - 10 of 11
Back Pack Cover with Light Sensor
This project demonstrates how to use a light sensor cell holder and make a circuit using two PCB LEDs. The resource provides a step by step guide on how to make a bike backpack cover with LEDs inserted along one of the reflective stripes. It uses a cell holder which has a light sensor on it which means the LEDs...
Be My Valentine
This resource describes how to make two hearts which light up when placed next to each other. Each heart has a magnet switch and magnet hidden along the side edges and once they are lined up with each other, a circuit is created. A miniature cell holder is used along with a PCB LED that glows through the fabric....
Be Seen Be Safe
This resource describes how to make a safety armband or beltband.The projects use a basic e-textiles circuit, but a popper has been added into the circuit to create a switch. When the popper is open the circuit is broken and the LED will not light up. When the popper is closed the circuit is functional and the LED...
Beanie Hat with a Standard and a PCB LED
This resource describes how to add an LED light to a beanie hat.It is an ideal starter project and uses a basic e-textiles circuit. Students will learn how to use conductive thread, a standard LED and a switched cell holder in order to place the light on the outside of the hat without cutting a hole. Step by step...
Flower Power Hair Accessory
This resource provides step by step instructions on how to make a hair accessory which lights up. Photographs are provided for each stage to illustrate the techniques. A small circuit needs to be hidden at the back of the hair accessory, so a miniature cell holder is an ideal component for this project. The circuit...
High Tech Textiles Project
This resource provides several textiles projects which use high tech materials and electronics.
Cool Brit...
Lazy Daisy Skirt with Zip Switch
This project shows how to embellish a skirt with buttons and embroidered flowers enhanced with LEDs in the centre of each flower. It uses a metal zip as an on/off switch so that when the zip is open the LEDs are off and when it is closed they come on. Each flower is made up of a lazy daisy embroidery stitch with a...
LED Brooch with Magnetic Switch
This resource describes how to make a brooch which uses a magnetic switch to holds it in place on the garment to turn on the LED. The magnetic switch is stitched into one side of the circuit. When the magnet is attached to the switch this joins the circuit making the LED switch on. When the magnet is taken away...
Rudolph the Reindeer Christmas decoration with push switch on/off
This resource describes how to make a Rudolph christmas decoration using a PCB LED that sits under the fabric and lights up when you hold the switch hidden in his cheek. The decoration is made out of felt fabric and is lightly stuffed to give a 3D effect. It uses embroidery stitches to decorate the surface and to...
Techdoodles
TechDoodles are quick activities that can be used as starters, plenaries, homework, revision activities or as a focus for a whole lesson. They can be worked on by individual students or in teams. They can be self or peer assessed as the answers are in small type down the side of the page. The resources cover...