Electronics and fashion resources
These activities present ideas and step-by-step guidance for making wearable technology projects.
Resources
Filter
Subject
Age
Type
Showing 11 result(s)
Back pack cover with light sensor
This project demonstrates how to use a light sensor cell holder and make a circuit using two PCB LEDs. The resource provides a step by step guide on how to make a bike backpack cover with LEDs inserted along one of the reflective stripes. It uses a cell holder which has a light sensor on it which means the LEDs...
Be my valentine
This resource describes how to make two hearts which light up when placed next to each other. Each heart has a magnet switch and magnet hidden along the side edges and once they are lined up with each other, a circuit is created. A miniature cell holder is used along with a PCB LED that glows through the fabric....
Be seen, be safe
This resource describes how to make a safety armband or beltband.The projects use a basic e-textiles circuit, but a popper has been added into the circuit to create a switch. When the popper is open the circuit is broken and the LED will not light up. When the popper is closed the circuit is functional and the LED...
Beanie hat with a standard and a PCB LED
This resource describes how to add an LED light to a beanie hat.It is an ideal starter project and uses a basic e-textiles circuit. Students will learn how to use conductive thread, a standard LED and a switched cell holder in order to place the light on the outside of the hat without cutting a hole. Step by step...
Pages
| Subject(s) | Design and technology, Electronics, programming and control, Textiles and Fashion |
|---|---|
| Age | 11-14 |
| Published | 2010 to 2019 |
| Published by | |
| Direct URL | https://www.stem.org.uk/cxjkns |
